Broadband Amplifier
Narrowband Amplifier
Pulse Amplifier
RF Amplifier Subsystem
RF Circulator
Radar
EW
Test and Measurement
Communication
RF Pulsed High Power Amplifiers MPM1214P60A
Product introduction
Mars RF's pulsed high power amplifiers can be used in L-band, K-band, ultra-high frequency, and other frequency bands, rf pulsed high power amplifiers also can be widely applied in interference, radar, communication, testing and measurement (such as EMI, EMC and other commercial), and industrial fields. These class C power amplifier have high flexibility and customizability, which can meet the needs of different requirements in industries and applications, providing users with reliable kinds of solutions. This RF pulsed high power amplifier’s operating frequency starts at 1.2GHz and ends at 1.4GHz, using the latest GaN technology to ensure good performance in the UHF band. RF pulsed high power amplifiers are suitable for L-band and can be widely used in television broadcasting, wireless telephone communication, wireless networks, microwave ovens, small capacity relay microwave communication, tropospheric scattering communication, and other fields to meet your multiple needs. Mars RF's solid state microwave high power amplifiers MPM1300P60A not only has an ultra-high operating frequency band but also performs well in input return loss value, with the advantage of stable reception and output signal. The input return loss of this pulsed high power amplifier can reach -15 dB, effectually reducing unnecessary loss but increasing class c amplifier efficiency. If you need better input return loss data, please consult the Mars RF team. The female SMA connector is used for RF connectors input and the female Type-N connector is used for RF connectors output. If you have special requirements for joints, you can consult us for detailed information.
Key Features
• Small size and light weight
• Power added efficiency＞15%
• Pulse width &duty cycle protection
• Over voltage &over current protection
FAQ
Why can you trust Mars RF products?
Mars RF uses automated production and testing for each product, all products were experienced rf power amplifier performance verification, and there are three kinds of protection devices inside the product to better protect the product and prevent product failure. Details are as follows:
Over temperature protection: Mars RF's solid-state RF pulsed high power amplifiers require heat dissipation at operating temperatures up to 85 degrees Celsius (they restart at 60 degrees Celsius instead of shutting down);
Over current protection: When the load of the solid state RF pulsed high power amplifiers produced by Mars RF is too low but does not reach the short-circuit state, and the output current exceeds the safe use value of the RF pulsed high power amplifiers, the over current protection circuit will control the input voltage and output current, so that the RF pulsed high power amplifiers always works within the safe range;
Over voltage protection: used to prevent failures caused by power timing control, sleep mode switching and voltage spikes.
Therefore you can trust our RF pulsed high power amplifiers, the pulsed high power amplifier will give you a first-rate product experience.
May We Also Suggest
Picture
Model No.
Data Sheet
Start(MHz)
Stop(MHz)
Pout(Watts)
Gain(dB)
Voltage(V)
Mode
Size(mm)
Quote
Start:1.5
Stop:30
Pout:200
Gain:53
Size:200x150x30