Leave Your Message
AI Helps Write

MBUC8150S44A 25W X-Band Block Up-converter

Model No.: MBUC8150S44A

The MBUC8150S44A is a 25W solid-state X-band block upconverter designed for satellite uplink transmission from 7.9 to 8.4 GHz. With a minimum saturated output power of 44 dBm, it offers higher output capacity within Mars RF's X-band BUC range. Fine-step gain control, Ethernet monitoring, and integrated protection functions support RF performance management, while an IP65-rated enclosure enables outdoor installation.

  • P1 (dBm) 40
  • Output Frequency(MHz) 7900-8400
  • Input Frequency(MHz) 950-1450
  • Gain(dB) 64 (min)
  • Gain Flatness(dB) ±1
  • Phase Noise(dBc/Hz@ 1kHz) ≤ −75
  • Gain Control Range(dB) 20
  • Power Consumption(W) 110
  • Input VSWR 1.5:1

Product introduction

The Mars RF MBUC8150S44A delivers 25W of X-band RF output power for satellite uplink applications requiring greater transmit power. Operating across 7.9–8.4 GHz, it uses a 6.95 GHz local oscillator to convert 950–1450 MHz IF signals to RF. The solid-state BUC achieves a minimum saturated output power of 44 dBm and a minimum power gain of 64 dB, providing a higher-power alternative to Mars RF's 10W and 20W X-band models.

RF performance is supported by ±1 dB typical power gain flatness, specified phase noise, and spurious performance. The 20 dB gain control range, adjustable in 0.25 dB steps, allows precise signal-level adjustment. Ethernet monitoring and control enable remote PA switching, gain adjustment, and status monitoring. An external 10 MHz reference input supports frequency synchronization, with automatic switching to the internal reference if the external signal falls below the specified level.

Designed for outdoor deployment, the MBUC8150S44A combines an IP65-rated enclosure with an operating temperature range of −40°C to +60°C. The unit incorporates protection and warning functions for LO unlock, excessive reflected power, over-current, over-voltage, and over-temperature conditions. A three-color LED indicator provides direct visual feedback on operating status, while the 24–30 V DC power input and 110 W typical power consumption define its power requirements for system integration.

Key Features

20 dB Gain Control Range with 0.25 dB Adjustment Steps

Ethernet Remote Monitoring with Optional RS485/RS232

External 10 MHz Reference with Automatic Internal Reference Switching

IP65-Rated Enclosure with Integrated Protection Functions

May We Also Suggest

Picture
Model No.
Data Sheet
Start(MHz)
Stop(MHz)
Pout(Watts)
Gain(dB)
Voltage(V)
Mode
Size(mm)
Quote
800
1000
200
53
28
CW
200x150x25
RF Broadband High Power Amplifiers KB002052M47A
RF Broadband High Power Amplifiers KB002052M47A pdf
800
1000
200
53
28
CW
200x150x25
Get QuoteStock : 7
RF Broadband High Power Amplifiers KB0001003M53A
Start:1.5
Stop:30
Pout:200
Gain:53
Size:200x150x30