Leave Your Message
AI Helps Write

MBUC11700S56A 400W Ku-Band Block Up-converter

Model No.: MBUC11700S56A

The MBUC11700S56A is a 400W solid-state Ku-band block upconverter designed for RF transmission across 10.7–12.7 GHz, a frequency range widely used for satellite downlinks. It combines wideband frequency conversion, RF amplification and AC power in an IP65-rated outdoor unit. Ethernet monitoring, adjustable gain and integrated protection functions support high-power system operation.

  • P1 (dBm) 50
  • Output Frequency(MHz) 10700-12700
  • Input Frequency(MHz) 950-2950
  • Gain(dB) 76 (min)
  • Gain Flatness(dB) ±1
  • Phase Noise(dBc/Hz@ 1kHz) ≤ −73
  • Gain Control Range(dB) 20
  • Power Consumption(W) 2200
  • Input VSWR 1.5:1

Product introduction

The Mars RF MBUC11700S56A is a 400W solid-state Ku-band block upconverter for high-power RF transmission across 10.7–12.7 GHz, a frequency range commonly used for satellite downlinks. It delivers a minimum saturated output power of 56 dBm and a minimum power gain of 76 dB. Compared with Mars RF's 300W model, this higher-power configuration uses a taller 330 × 200 × 280 mm enclosure weighing 18 kg, reflecting a different mechanical and power configuration rather than a direct replacement within the same installation space.

Frequency conversion is handled by a fixed 9.75 GHz local oscillator, translating 950–2950 MHz IF signals into Ku-band RF over the complete 2 GHz operating range. The BUC provides a 20 dB gain control range adjustable in 0.25 dB steps, allowing output levels to be set remotely. An external 10 MHz reference input supports frequency synchronization, with automatic switching to the internal reference when the external input level falls below the specified threshold.

The MBUC11700S56A accepts 180–230 VAC at 50 Hz and has a typical power consumption of 2200 W. Ethernet monitoring and control provide access to PA switching, gain adjustment, temperature status and fault alarms, with optional RS485/RS232 interfaces available. Its IP65-rated enclosure is specified for outdoor operation from −40°C to +60°C, with protection and warning functions addressing LO unlock, electrical faults, over-temperature and excessive reflected power.

Key Features

Integrated High-Power Design in an 18 kg Outdoor Enclosure

2 GHz IF-to-RF Conversion with a Fixed 9.75 GHz LO

Integrated 180–230 VAC Power Supply

Ethernet Remote PA Control, Temperature Monitoring and Fault Alarms

IP65-Rated Housing with Reflected-Power and Electrical Fault Protection

May We Also Suggest

Picture
Model No.
Data Sheet
Start(MHz)
Stop(MHz)
Pout(Watts)
Gain(dB)
Voltage(V)
Mode
Size(mm)
Quote
800
1000
200
53
28
CW
200x150x25
RF Broadband High Power Amplifiers KB002052M47A
RF Broadband High Power Amplifiers KB002052M47A pdf
800
1000
200
53
28
CW
200x150x25
Get QuoteStock : 7
RF Broadband High Power Amplifiers KB0001003M53A
Start:1.5
Stop:30
Pout:200
Gain:53
Size:200x150x30