004001
Leave Your Message

Mars' RF GaN High Power Amplifier Subsystem MS1060P45A

Model No.: MS1060P45A

Mars' RF GaN microwave amplifier subsystem MS1060P45A is operating from 1000MHz to 6000MHz with 30 Watts saturated output power. Mars' RF GaN high power microwave amplifier subsystem is integrated with a universal voltage power supply with the operating voltage is 220V typical.

  • Start 1000MHz
  • Stop 6000MHz
  • Pout 30Watts
  • Gain 45dB
  • Voltage 220 V
  • Mode CW/FM/AM
  • Size 19'', 4U

Product introduction

With a saturated output power of 30 Watts and power gain 45 dB, Mars' RF GaN wideband amplifier subsystem MS1060P45A operates between 1000MHz and 6000MHz. The RF GaN high power wideband amplifier subsystem MS1060P45A from Mars RF is integrated with a power supply. It can be supplied with 220V typical operating voltage. The operating ambient temperature of this subsystem varies from minus 10 degrees Celsius to above zero 40 degrees Celsius and the storage temperature can be reached from minus 20 degrees Celsius to above zero 65 degrees Celsius. And the relative humidity of this Mars' RF GaN amplifier subsystem MS1060P45A can be reached to 95%. The product is designed to operate in even the harsh environments and can withstand relative shocks and vibrations. 
The purpose of Mars RF is “focus on your application”. To achieve this purpose, Mars RF always provides the 7*24 hours fast responding. Our team of experienced engineers is always available to assist you with any questions or issues you may encounter, whether it's a technical problem or a simple enquiry about the product. Additionally, the product comes with a comprehensive warranty and customer support to ensure reliable performance and maximum uptime.

Parameters

Start Frequency 1000 MHZ
Stop Frequency 6000 MHz
Output power 30 Watts
RF amplifier gain 45 dB
Harmonics -15dBc
Spurious signals -55dBc
Operating Voltage 220V typical
Power Consumption 800Watts typical

Features            

• Frequency range: 2-6 GHz
• Broadband power amplifier 
• High efficiency
• Microwave amps
• Compact and rugged design
• High power density
• Suitable for AM and FM modulation type
• Power consumption: 800 Watts typical

OTP, OVP, OCP in Mars RF

In order to improve the reliability of product operation, Mars, as a RF amplifier supplier, has implemented OTP (over-temperature protection), OVP(over-voltage protection) and OCP(over-current protection)in these broadband power amplifier products. Any circumstance where the current flowing through a conductor or device exceeds the intended value is referred to as over-current. As the name implies, over-voltage is essentially a larger supply of voltage than the permissible amount. Over-temperature protection means that when the internal temperature overpass the maximum safe operating temperature, the power supply is shut down.

FAQ                   

1.What’s the meaning of “D-Sub 9-position Male”?
The D-Sub 9-position connector refers to a type of electrical connector that has 9 pins arranged in two rows. The "male" designation indicates that it is the plug or connector with the protruding pins that are meant to be inserted into a corresponding "female" receptacle. This type of connector is commonly used for serial communication, such as RS-232 connections, and in various computer and electronic devices. For the Mars' RF high power wideband amplifier subsystem MS1060P45A, there are 4 pins keeping reserved.

May We Also Suggest

Picture
Model No.
Data Sheet
Start(MHz)
Stop(MHz)
Pout(Watts)
Gain(dB)
Voltage(V)
Mode
Size(mm)
Quote
800
1000
200
53
28
CW
200x150x25
RF Broadband High Power Amplifiers KB002052M47A
RF Broadband High Power Amplifiers KB002052M47A pdf
800
1000
200
53
28
CW
200x150x25
Get QuoteStock : 7
RF Broadband High Power Amplifiers KB0001003M53A
Start:1.5
Stop:30
Pout:200
Gain:53
Size:200x150x30

Leave Your Message